|
Punch Pro Operator's Manuals
For Ogura™ Warranty Service Contact Hougen Mfg
Request a Free Catalog
Examples of Ogura/Punch-Pro in Action
|
 |
|
|
|
 |
|
|
|
Hydraulic Hole Punches
|
|
|
|
Holemaking convenience in all types of material*
|
|
|
|
H-Steel |
|
|
|
Flat Bar |
|
|
|
Angle |
|
|
|
Channel |
|
|
Lip Channel
(75003A Model Only) |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
|
|
 |
|
|
|
Weight |
16.5 lbs
(7.5 kg) |
|
Max Dia. |
19/32"*
(15mm) |
|
Pressure (tons) |
8.5 |
| Material |
1/4"**
(6.4mm) |
| Throat Depth |
1.02"
(26mm) |
| Speed |
4 sec |
|
|
Weight |
26 lbs
(11.8 kg) |
|
Max Dia. |
25/32"*
(20mm) |
|
Pressure (tons) |
13.2 |
| Material |
19/64"**
(7.5mm) |
| Throat Depth |
2-3/8"
(60.3mm) |
| Speed |
1.2 sec |
|
|
Weight |
35.8 lbs
(16.2 kg) |
|
Max Dia. |
25/32"*
(20mm) |
|
Pressure (tons) |
14.8 |
| Material |
19/64"**
(7.5mm) |
| Throat Depth |
2-5/32"
(54.8mm) |
| Speed |
1.5 sec |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
 |
|
|
 |
|
|
|
Weight |
39.7 lbs
(18 kg) |
|
Max Dia. |
13/16"
(20.6mm) |
|
Pressure (tons) |
22 |
| Material |
3/8"
(9.5mm) |
| Throat Depth |
1-9/16"
(39.7mm) |
| Speed |
2 sec |
|
|
Weight |
79.3 lbs
(36 kg) |
|
Max Dia. |
7/8"
(22.2mm) |
|
Pressure (tons) |
27.5 |
| Material |
3/8"
(9.5mm) |
| Throat Depth |
3-15/16"
(100mm) |
| Speed |
3 sec |
|
|
|
Weight |
65 lbs
(29.5 kg) |
|
Max Dia. |
15/16"*
(23.8mm) |
|
Pressure (tons) |
34.1 |
| Material |
1/2"**
(12.7mm) |
| Throat Depth |
1-31/32"
(50mm) |
| Speed |
4 sec |
|
|
|
* Ogura Punches are designed for structural steel, but can be used in other materials. Consult Hougen Technical Support for questions about your particular application: (810) 635-7111 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All six Hydraulic Punches are 100% self contained and operate off 120V power. Their exclusive single body construction incorporates a high efficiency hydraulic pump in the punching head. There are no separate pumps or hoses to move or fittings to leak and maintain.
Ogura/Punch-Pro's improved punch and die design requires less tonnage to punch, resulting in lighter weight units which result in less operator fatigue.
Ogura/Punch-Pro's are fast to operate because they punch clean, accurate holes in as little as 1.2 seconds with the single pull of a trigger while an auto-return mechanism automatically returns the punching rod to the starting position. The punch can also easily be jogged down for accurate hole location.
Punch round or oblong holes...round holes from 1/4" to 15/16" diameters and oblong holes 1/4" X 1/2" to 11/16" X 13/16" through up to 1/2" thick materials including Flat Bar, Channel, Angle, H-Beam and Lip Channel.
* See Punch Chart for maximum thickness
** See Punch Chart for maximum punch size
|
|
